What is a cant in lumber?
A cant is a piece of wood usually over 2″ thick and sawn on at least three sides. Most pallet shops want cants to re-saw into pallet parts because they have more options on what sizes they can cut from them. From Gene Wengert, forum technical advisor: A cant is a partially sawn log with…
A cant is a piece of wood usually over 2″ thick and sawn on at least three sides. Most pallet shops want cants to re-saw into pallet parts because they have more options on what sizes they can cut from them. From Gene Wengert, forum technical advisor: A cant is a partially sawn log with at least one flat side.Click to see full answer. Then, why is a log called a cant?It looks like a peavy except that it has a metal ring with a lip on its end, rather than a point. In pre-pushbutton sawmill days, the cant hooks were used to roll the cant after a slab was cut off. (A log that has had one or more slabs cut off it is called a ‘cant’).”Furthermore, how long should logs dry before sawing? one to two years Also know, what happens at a sawmill? A sawmill or lumber mill is a facility where logs are cut into lumber. Generally, only the saw was powered, and the logs had to be loaded and moved by hand. An early improvement was the development of a movable carriage, also water powered, to move the log steadily through the saw blade.How do you cut logs into lumber?To get you started, here is an introductory course in sawing your logs to lumber. Live sawing, also known as slab sawing or through and through sawing, is when a log is sawn about halfway through on the opening face and then turned once to the opposite face for sawing until the log is finished.
