What is depth of cut in turning operation?
3. Depth of cut (t)—The tertiary cutting motion that provides necessary depth of material that is required to remove by machining. It is expressed in mm. It is usually given in the third perpendicular direction (velocity, feed and depth of cut usually act in mutually perpendicular directions).Click to see full answer. Likewise, people ask, what…
3. Depth of cut (t)—The tertiary cutting motion that provides necessary depth of material that is required to remove by machining. It is expressed in mm. It is usually given in the third perpendicular direction (velocity, feed and depth of cut usually act in mutually perpendicular directions).Click to see full answer. Likewise, people ask, what is depth of cut in turning?Depth of cut is the thickness of metal that is removed during machining. The perpendicular distance measured between the machined surface and the uncut surface of the workpiece is taken.Similarly, what is difference between feed and depth of cut? Feed, Speed, and Depth of Cut Cutting speed is defined as the speed at which the work moves with respect to the tool (usually measured in feet per minute). Feed rate is defined as the distance the tool travels during one revolution of the part. The primary factor in choosing feed and speed is the material to be cut. what is depth of cut in lathe? The depth of cut (t) is the perpendicular distance measured from the machined surface to the uncut surface of the workpiece. In a lathe machine, the depth of cut is shown as follows: Where, d1 – diameter of the workpiece surface before machining. d2 – diameter of the machined surface.How do you calculate cutting time?The machining time depends on the type and extent of machining required, material being machined, speed, feed, depth of cut and number of cuts required. N = Number of stroke/min Page 2 ME6005/Process Planning & Cost Estimation Year/sem:IV/VII f = Feed/stroke in mm V = Cutting speed m/min K = Return time/Cutting time 8.
