What is the best way to roll paint on a wall?

To use a paint roller, pour your paint into a shallow pan, dampen the roller sleeve with water, and roll the sleeve in the pan to load it evenly with paint. Next, start at one of the bottom corners and roll the paint onto the wall using a slightly angled, upwards stroke, stopping 2–4 inches from the ceiling.Click to see full answer. Moreover, how do you paint a wall with a roller?Dip the roller lightly into the paint, the paint should cover less than half of the roller. Then roll it backwards and forwards on the ramp of the tray to evenly distribute the paint on the roller cover. Roll the paint onto the surface with in a large zigzag pattern. Then fill in the space with criss-cross strokes.One may also ask, why does my paint roller slide instead of roll? It will drip en route to the wall and have a tendency to slide and smear instead of roll across the surface. The most effective method of painting with a roller is to paint 2-or 3-square-foot areas at a time. If you roll down on the first stroke, the paint may puddle under the roller and run down the wall. Accordingly, will streaks go away when paint dries? Roller marks, which painters sometimes call “holidays,” are a routine hazard when painting with a roller, and there are many ways to avoid them. When you notice holidays after the paint has dried, you can usually make them disappear by applying another coat after sanding lightly—if necessary—to remove drips and humps.How do you fix uneven wall paint? Apply plaster patching compound to very deeply recessed layers of paint. Smooth out the wet plaster using a putty knife. Sand the uneven wall surfaces with 150-grit sandpaper. Wipe down the wall with a moist rag to removed the sandpaper dust. Tape any trim or other surfaces with painter’s tape.