What is the difference between Ford and Holden trailer bearings?
LM (Holden bearings) are rated for 750 kg on a 39 mm round or 40 mm square axle. SL (Slimline or Ford) bearings are rated for 1500 kg on a 45 mm round or square axle. With standard bearings, the inner bearing is larger than the outer, but with parallel bearings they’re the same size.Click…
LM (Holden bearings) are rated for 750 kg on a 39 mm round or 40 mm square axle. SL (Slimline or Ford) bearings are rated for 1500 kg on a 45 mm round or square axle. With standard bearings, the inner bearing is larger than the outer, but with parallel bearings they’re the same size.Click to see full answer. Also know, are Ford and Holden stud patterns the same?The thread diameter of the wheel studs is different between Holden and Ford, I find this the quickest and easiest way to tell them apart. The Holden hub runs 7/16 inch UNF nuts whilst the Ford hub runs 1/2 inch UNF nuts, and the size of the hex is different (bigger on FOrd pattern).Likewise, what bearings do dunbier trailers used? Dunbier uses standard Holden wheel bearings for all trailers with 39mm round and 40mm Square Axles. Axles that are 45mm or 50mm Square use Ford Bearings. Also question is, are all wheel bearings the same? Wheel bearings are used in both the front wheels and the back wheels. That is why you won’t necessarily have to replace all of your wheel bearings if only one is worn out. Many (dishonest) mechanics will tell you that all need to be replaced or both on the same axle. This is usually not necessary.How do I know what size bearings to get?You can measure the dimensions of a bearing by using a vernier caliper like the one below or measuring accurately with a ruler. All bearings will have an inner diameter (ID), an outside diameter (OD) and width (W). Bearings are sometimes referenced by these dimensions, in that order: ID x OD x W.
