What is the proper way to hang a washing machine?

To install a washing machine, start by connecting the water supply hose to your new washing machine. Then, take the drain hose that’s attached to the washing machine and lay the end over the edge of a nearby sink or basin. If there isn’t a nearby sink or basin, you’ll need to attach the drain hose to a standpipe.Click to see full answer. Furthermore, is it easy to plumb in a washing machine?Connecting a washing machine is simple, especially if it’s going in the same place as the old one. 1. Pull your existing machine towards you so you can see the water inlet hose and waste pipe. You’ll probably find just one water inlet hose as most modern machines only have a cold water feed. how much does it cost to install plumbing for a washing machine? Washing Machine Installation Cost. As long as the site is prepared, the installers only have to slide the machine in place and connect it to existing plumbing and electrical hookups. Installing a washing machine costs an average of $100 to $200. Subsequently, one may also ask, do you need a plumber to install a washing machine? Since washing machines use a large amount of water and a small plumbing mistake can result in serious home water damage, we recommend hiring a professional plumber rather than trying to install the plumbing yourself. Here is a basic overview of the plumbing process: Turn off the main water supply to the house.Do you need to connect hot water to washer?Originally, washing machines were connected to the cold and the hot water supply; because the hot water was used to supplement the heating process. Don’t worry you just need to connect the hot and the cold intake hoses to the cold water supply valve using a ‘ Y ‘ Piece hose connector.