Where is damper on HVAC?

An HVAC damper (also called a duct damper) is a movable plate, located in the ductwork, that regulates airflow and redirects it to specific areas of the home. Dampers are typically used in zoning or “zone control” systems.Click to see full answer. Similarly, you may ask, what is a damper in HVAC?A damper is a valve or plate that stops or regulates the flow of air inside a duct, chimney, VAV box, air handler, or other air-handling equipment. A damper may be used to cut off central air conditioning (heating or cooling) to an unused room, or to regulate it for room-by-room temperature and climate control.Secondly, what is VAV in HVAC? From Wikipedia, the free encyclopedia. Variable air volume (VAV) is a type of heating, ventilating, and/or air-conditioning (HVAC) system. Unlike constant air volume (CAV) systems, which supply a constant airflow at a variable temperature, VAV systems vary the airflow at a constant temperature. Correspondingly, how do I know if my HVAC damper is open? Put the damper into an open position and check the registers once again to see if the airflow starts. If the damper is closed and you are feeling low airflow, or none at all, it is most likely a bad damper. For the automatic control damper, turn your HVAC system on. Check for airflow in the registers.Is it OK to close HVAC dampers?Bottom line: You probably shouldn’t close your air supply vents. Excessive static pressure inside an HVAC system is never a good thing. Closing too many air supply dampers could put you in the static pressure “danger zone.” Instead, have a pro measure the static pressure to see if you can safely adjust your dampers.