Why does a light switch have 3 wires?
The switch in question is a single pole. From it, there is 3 wire cable that leads to a light which then connects to other lights controlled by their own switches. There’s no three way set up and this isn’t a switch loop either. Plus, The two black wires are using the same terminal.Click to…
The switch in question is a single pole. From it, there is 3 wire cable that leads to a light which then connects to other lights controlled by their own switches. There’s no three way set up and this isn’t a switch loop either. Plus, The two black wires are using the same terminal.Click to see full answer. Subsequently, one may also ask, how does a 3 wire switch work?”3-way” is the electrician’s designation for a single pole double throw (SPDT) switch. The switches must create a complete circuit for current to flow and the bulb to light. When both switches are up, the circuit is complete (top right). When both switches are down, the circuit is complete (bottom right). does it matter which wire goes where on a light switch? If your switch has a “LINE” marking, the always hot wire goes to this. The other connection will be “LOAD” where the load (ie light fixture) is wired. The load wire may have red electrical tape on it to differentiate. Hereof, why does my light switch only have two wires? Yes, this is normal. There are two ways to wire a two-way switch with 2-core cable like you have: This is how your switches are wired. As you can see from the diagram, the white wire is used — it completes the circuit back to the electrical supply’s neutral line.What color wire goes where on a light switch?The black (hot) wire goes to the brass screw or into the hole in the back of the device on the same side as the brass screw. This wire is sometimes red. The green or bare copper (ground) wire, if the device has one, attaches to the green screw terminal on the switch or to the electrical box.
