Why does my lawn mower stall when I engage the blades?
If a pulley doesn’t spin freely, it can cause the engine to die when the blades are engaged. The pulleys in your lawn tractor are driven by the drive belt, and turn the spindles. If a pulley doesn’t spin freely, it can cause the engine to die when the blades are engaged.Click to see full…
If a pulley doesn’t spin freely, it can cause the engine to die when the blades are engaged. The pulleys in your lawn tractor are driven by the drive belt, and turn the spindles. If a pulley doesn’t spin freely, it can cause the engine to die when the blades are engaged.Click to see full answer. Subsequently, one may also ask, why won’t my lawn mower blades engage?If the PTO clutch is not getting power, if the clutch solenoid is defective, or if the clutch is worn out, the lawn mower blades will not engage. The PTO clutch is not repairable—if the clutch is defective, you must replace it. As a result, the clutch won’t engage, and the lawn mower blades won’t rotate.Similarly, how do you engage the blade on a riding lawn mower? How to Engage Lawn Mower Blades on a John Deere Turn the key to the “on” position, advance the throttle to half speed and allow the engine to warm up for 2 minutes. Lower the mower to the desired cutting height. Engage the mower blades; push the lever to the right of the steering wheel all the way forward. Beside above, why does my John Deere stall? Most problems that will cause a John Deere lawn mower to stall after 20 minutes occur due to the distribution and rate of flow in the fuel and air systems. If these systems are dirty or restricted, the mower will stall out and be difficult to restart.What is a PTO switch on a lawn mower?” PTO Switch Definition: PTO is an abbreviation for Power Take-Off, and it is a mechanical device or shaft that connects a tractor’s power to another piece of equipment, like a spreader or snow blower. Do not repair your PTO while your equipment is operating.
