Why does my shark vacuum keep shutting off?
The vacuum has a safety feature that turns off the vacuum when the vacuum gets to a certain high temperature or overheats. This happens because the vacuum has a motor protective thermostat. If the vacuum turns off due to overheating, the thermostat has to be reset before you can use it again.Click to see full…
The vacuum has a safety feature that turns off the vacuum when the vacuum gets to a certain high temperature or overheats. This happens because the vacuum has a motor protective thermostat. If the vacuum turns off due to overheating, the thermostat has to be reset before you can use it again.Click to see full answer. Keeping this in consideration, why does my vacuum cleaner keep shutting off?The vacuum motor shutting down usually is an indication that there is a partial air blockage in the tubing that the dirt travels through. The air that the vacuum cleaner picks up has to travel through the vacuum and the dirt stops at the filter and the air continue on through the motor to keep it cool.Beside above, why does my Dyson keep turning off? When a part becomes blocked or clogged the vacuum will automatically shut off to prevent any further damage. To clear blockages, first turn the power off and unplug the vacuum. Then, remove the wand from the vacuum base. Furthermore, how do I reset my shark vacuum? Below are the steps to reset the shark vacuum: Put the Power button to the On-Off position and keep the vacuum unplugged. Clear the hose and filter if needed. Wait for the vacuum to cool completely then plug it in again. Turn on the power switch. Why did my shark vacuum stopped working?Unplug the vacuum. Check for a clogged hose or filter; unclog the hose and replace the filter. Turn the power switch to the “I-On” position to start the vacuum. If the vacuum still does not start, contact Customer Service at 1-800-798-7398.
