Can you mix water based and oil based stain?
ANSWER: Yes! but the underlying finish has to be absolutely dry. When using a water based topcoat over an oil based stain, allow oil based finishes, such as Java Gel Stain, to dry at least 72 hours before coating with a water based topcoat. → Oil based finishes amber over time.Click to see full answer….
ANSWER: Yes! but the underlying finish has to be absolutely dry. When using a water based topcoat over an oil based stain, allow oil based finishes, such as Java Gel Stain, to dry at least 72 hours before coating with a water based topcoat. → Oil based finishes amber over time.Click to see full answer. Herein, can you mix water and oil based stains?You cannot mix water- and oil-based products together. General Finishes Enduro-Var Urethane Topcoat can only be used over raw wood or General Finishes water-based wood stains or dye stains. Oil-based finishes amber over time; do not use them over white or very light colors.Subsequently, question is, is oil based stain better than water based? Oil-based stains are not easily penetrated by the elements. Oil-based stains dry more slowly than water-based stains and thus maintain a more even finish. Oil-based stains are far more durable than water-based stains and thus require far less maintenance. One may also ask, can you use oil based stain with water based polyurethane? You may apply the Minwax Water Based Polyurethane over a fully cured Minwax Wood Finish Stain (oil-based). Allow final coat of stain to dry 8-24 hours (Dry time is affected by your ventilation, temperature, and relative humidity).Can you dilute oil based stain?It’s virtually impossible to make stain too thin to use, but keep in mind that the thinner you make it, the less color it provides. Use mineral spirits for oil-based stains, water for water-based stains, and lacquer thinner for lacquer-based or NGR stains.
