Can you put trim over tile?

With some, the design may include stained or painted wood baseboard instead of tile cove or tile base. Since nailing is not an option, installing wood molding on ceramic tile requires an adhesive that bonds to wood and tile, and holds up in moist environments.Click to see full answer. Similarly, can you put molding over tile?Using a piece of crown molding as a reference, nail the board to the wall slightly above the bottom edge of the crown molding. The tile should be able to go slightly under the crown molding, but the wood is still there to be nailed into. Cut your mouldings according to the guidelines in the post.One may also ask, how do you cover baseboard tiles? Steps: Disconnect the water supply to the sink and carefully remove the sink. Cut the 1/2-inch plywood into 2-inch strips, and apply the strips over the tile. Attach the beadboard pieces using the nail gun. Install the baseboard and top molding using the nail gun. Caulk all the seams, and touch up the paint. Also, how do you cover exposed tile edges? To give the edge a clean, water-tight finish, place a piece of masking tape one grout joint away from the edge of the last tile. Fill this gap between the tile and the masking tape with a smooth bead of caulk. This will finish the edge without extra tiles.Do baseboards go on top of tile?In my experience, baseboard can either be installed before or after the tile, but if it is installed before, the baseboard is installed at the level the tile will be, leaving a gap below the baseboard to accommodate the tile.