How do I make my garage door light stay on?

Change the Light Timing Using A Smart Control Panel Use the navigation buttons to scroll to LIGHT SETTINGS. Set the duration for garage door opener light to stay on after operation. Select a range of 1-1/2 to 4-1/2 minutes. Turn the motion detection feature OFF/ON, and turn the entry light feature OFF/ON.Click to see full answer. Similarly, why does my garage door light stay on?The opener’s light may be staying on because the light feature has been activated. The light feature was designed to turn on automatically so you never have to enter a dark garage. This feature is triggered when you interrupt the signal between the photo eye sensors when entering or exiting the open garage door.Furthermore, why is the light on my garage door opener blinking? The blinking opener lights indicate that the safety sensors are likely blocked or out of alignment. Defective safety sensors or faulty sensor wiring also cause the opener lights to blink 10 times. The safety sensors use an invisible beam of infrared light to detect obstructions in the garage door’s path. In this regard, why won’t the light go off on my garage door opener? The light(s) turns on when the opener is activated and turns off automatically. If your light consistently stays on, the reason may be as simple as the light button on your Multi-Function door control being accidentally pressed. You could also have a problem with your logic board ordoor control circuit.How do you turn off the motion sensor on a liftmaster garage door opener?Deactivate the Motion Sensor: Press the motion sensing button or flip the switch on the side of the door control. TIP: We recommend the motion sensor be disabled when using the opener lights as work lights. Otherwise the lights will turn off automatically if you are working beyond the sensor’s range.