How do you change the oil on a Briggs and Stratton engine?

DO NOT OVERFILL. Step 1: Getting Started. Start the engine and run it until it is warm. Step 2: Draining The Oil. Tilt the mower deck with the air filter or spark plug side up, and position some newspaper and an oil pan or jug beneath the mower. Step 3: Engines with Oil Filters. Step 4: Fill With New Oil. Click to see full answer. Besides, how much oil does a Briggs and Stratton lawn mower take? Briggs & Stratton 5W-30 of oil is required for the I/C (Industrial/Commercial) engine. Note: Two bottles are required to meet your oil capacity. 18 oz. of oil is required for the Classic engine.Beside above, what happens if you put too much oil in your lawn mower? Every lawn mower needs to oiling to prevent overheating while in use. Oil also lubricates your mower to make it work efficiently. ?Too much oil in the crankcase can damage the motor of the lawn mower. Too much oil can also cause the lawn mower to leak which can damage other parts of the lawn mower other than its motor. Also asked, what oil does a Briggs and Stratton engine take? Use Briggs & Stratton SAE 30W Oil above 40°F (4°C) for all of our engines. Check oil level regularly. Air-cooled engines burn about an ounce of oil per cylinder, per hour.How much oil does a Briggs and Stratton 6.75 take?Use Briggs & Stratton SAE 30W Oil above 40°F (4°C) for all of our engines. Check oil level regularly. Air-cooled engines burn about an ounce of oil per cylinder, per hour. Fill to mark on dipstick.