How do you level washer legs?

Washing machines have adjustable, front-leveling legs with a lock nut. You can adjust each leg to the proper height and then tighten the lock nut up against the body of the machine to keep the leg height from changing. After adjusting each leg, lean against the machine and make sure that you feel no movement.Click to see full answer. In respect to this, how do self leveling washer legs work?Front legs are adjustable up or down an inch, rear legs are self-leveling. To set the rear self-leveling system, tip the machine forward so that the rear legs are about 4″ off the floor. Then drop the washer to set the rear legs. They will automatically adjust to the level of the floor.Beside above, how do you rebalance a washing machine? If your washer is located on a pedestal, the problem can be amplified. Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it. Considering this, how do you level a washing machine without a level? Leveling a Shaking Washing Machine Find out if the machine is level: Use a carpenter’s bubble level or find an app on your phone that mimics this tool. Loosen the lock nut: The washing machine’s two front legs screw up and down. Adjust the front legs: The machine is less likely to vibrate if it sits low to the ground. What happens if your washing machine isn’t level?If your washing machine is not perfectly level with all four legs touching the floor it can bang and rock back and forth. This isn’t good for the machine and may damage walls and floors and anything else near the machine. Severe vibrations are a leading cause of future leaks and mechanical problems.