How do you loosen a Genesis bow?
Place the allen wrench in the limb bolt and make note of it’s position. Then turn each limb bolt, both top and bottom, one full turn. Each turn of the limb bolts takes approximately 1.75 pounds of draw weight off the bow. Genesis recommends a maximum of 6 full turns.Click to see full answer. Simply…
Place the allen wrench in the limb bolt and make note of it’s position. Then turn each limb bolt, both top and bottom, one full turn. Each turn of the limb bolts takes approximately 1.75 pounds of draw weight off the bow. Genesis recommends a maximum of 6 full turns.Click to see full answer. Simply so, how do you tighten a Genesis bow?Using a 3/16″ Allen Wrench, turn the limb bolts in a counter-clockwise direction to decrease the draw weight. One full turn equals approximately 1.4 lbs. Always turn the limb bolts the same number of turns, top and bottom, when adjusting draw weight.Also Know, can you put sights on a Genesis bow? All Genesis bows are Archery Trade Association Standard (sight #10-24 and rest #5/16-24). Then, how do you loosen a bow? Tighten or loosen the limb bolts to the desired weight. Insert the short arm of an Allen wrench (most commonly a 3/16 size, usually included with the bow) into the bolt and make sure it is properly slotted. Then, turn the wrench either clockwise to tighten the bolt or counterclockwise to loosen it.Can you put a whisker biscuit on a Genesis bow?The NAP flipper style arrow rest that comes with the Genesis Original is a pretty basic thing, but it works. You can get a drop-down rest or a Whisker Biscuit for the Genesis Original as well, but keep in mind that these upgraded accessories might not meet the requirements for competitions within the NASP.
