How do you mix Bora care with mold?

Mix rate for Bora-Care with Mold Care: Mix 1 gallon of the product with 5 gallons of water. Apply mixed solution at a rate of 1 gallon per 240 square feet. For 2×4 lumber each gallon will treat 3500 linear feet. For surface application each gallon of Boracare Mold Care will treat 1,200 square feet.Click to see full answer. In this way, does Bora Care kill mold?Not only does Bora-Care with Mold-Care treat mold, but it also acts as a surface protectant, killing all forms of fungi, sanitizing and disinfecting the treated area. In addition, wood treated with Bora-Care with Mold-Care will render wood impervious to termites, powderpost beetles and othe wood-destroying insects.Beside above, how do you kill wood destroying fungus? Although borates will kill wood destroying fungi, it will not add strength to the damaged wood. The most effective and common method for moderate to severe damage is to replace the damaged wood. However, if only a small area is affected, borates and reinforcing the damaged wood are a cost-effective alternative. Similarly one may ask, is Boracare toxic? Answer: Boracare is known to be a green product and less toxic than many other wood preservative products. Having said that, any product that has the ability to kill insects and fungus does have some level of toxicity. Once dry, Boracare is known to be less toxic than common table salt.Does mold rot wood?Mold and wood rot are both produced by fungi, but one is more dangerous to wood than the other. While mold is unhealthy, it will not break down wood like wood rot does. However, because mold also requires moisture to form, its presence is a warning that wood rot could happen.