How do you open a dual flush toilet cistern?

Extracting The Dual-Flush Buttons Push one button down all the way and keep it down (the toilet will flush). Turn your finger so that your fingernail engages with the side of the other button. Both buttons have a finger nail notch on the side. Dig your nail into the notch and pull out the button.Click to see full answer. In this way, how does a dual flush toilet cistern work?Dual flush toilets employ a larger trapway (the hole at the bottom of the bowl) and a wash-down flushing design that pushes waste down the drain. Because there’s no siphoning action involved, the system needs less water per flush, and the larger diameter trapway makes it easy for waste to exit the bowl.Likewise, how do you fix a toilet that won’t flush? If it’s under the flapper, lift the chain out of the way and re-seat the flapper. At this point, the tank should begin to fill. When it stops filling, flush the toilet. Make sure the flapper is seated properly, then replace the tank cover and give yourself a pat on the back. Herein, how do you remove the lid from a toilet cistern push button? Push one button down all the way and keep it down (the toilet will flush). Turn your finger so that your fingernail engages with the side of the other button. Both buttons have a finger nail notch on the side. Dig your nail into the notch and pull out the button.Which button do I press on a dual flush toilet?More commonly, a button controls the flush. The button will be divided into two sections, usually labeled 1 and 2. Press 1 for liquid waste and 2 for solid waste. These buttons are more often than not located at the top of the toilet, but can be found on the right or left side as well on certain models.