What is an example of a Class I Division II location?

Good examples of Class I, Division 1 locations would be the areas near open dome loading facilities or adjacent to relief valves in a petroleum refinery, because the hazardous material would be present during normal plant operations.Click to see full answer. In this way, what is a Class 1 Division 2 location?Class 1 Hazardous Locations refer to facilities which deal with flammable gases, vapors, and liquids. Division 2 specifies that these flammable materials are handled, processed, or used in the defined hazardous location, but are not normally present in concentrations high enough to be ignitable.Additionally, what is Class I Div II? Class I, Division 2 or Zone 2 classified locations. An area where ignitable concentrations of flammable gases, vapors or liquids are not likely to exist under normal operating conditions. In this area the gas, vapor or liquids would only be present under abnormal conditions (most often leaks under abnormal conditions). Also asked, what is a Class 2 hazardous location? Class II hazardous locations are areas where combustible dust, rather than gases or liquids, may be present in varying hazardous concentrations. Class II locations are further subdivided into two divisions.Does Class 1 Div 2 require explosion proof?The need for Explosion-Proof equipment then arises due to this potential for fire or explosion. Division 2 is also a subset of Class I and is classified as an area where the explosive or flammable gases, vapors or liquids mentioned above are not likely to exist during regular operation.