Why won’t my garage door opener light go off?

Determine the door control type by consulting the owner’s manual. Reset the light timer to it’s lowest setting (1-1/2 minutes). Disconnect power from the unit, and disconnect door control wires from the opener. If light(s) turn off after 1-1/2 minutes, the problem lies with either the door control or wiring.Click to see full answer. Hereof, how do I make my garage door opener light stay on? Change the Light Timing Using A Smart Control Panel Use the navigation buttons to scroll to LIGHT SETTINGS. Set the duration for garage door opener light to stay on after operation. Select a range of 1-1/2 to 4-1/2 minutes. Turn the motion detection feature OFF/ON, and turn the entry light feature OFF/ON.One may also ask, do garage door sensors go bad? Door sensors do go bad, so if no light is showing at all, you may need to replace them. You can save yourself some time by using the existing wires. Also asked, why does garage door opener light stay on? The opener’s light may be staying on because the light feature has been activated. The light feature was designed to turn on automatically so you never have to enter a dark garage. This feature is triggered when you interrupt the signal between the photo eye sensors when entering or exiting the open garage door.How do you turn off a automatic sensor light?Most manufacturers make it a fairly easy process to disable this main feature of the lights. A switch on the fixture should read “on time,” usually found directly under the motion sensor. Set it to any position, aside from the test position, and flip off the switch that the light is connected to.