Why won’t my water softener stop draining?
Softener Won’t Stop Running/Draining This could be due to a clogged drain line/control, injector/venturi or brine line/valve. It might also be that the valve assembly in the salt tank cannot move or that water pressure in your house is too low (measure and adjust accordingly). Any blockages have to be removed.Click to see full answer….
Softener Won’t Stop Running/Draining This could be due to a clogged drain line/control, injector/venturi or brine line/valve. It might also be that the valve assembly in the salt tank cannot move or that water pressure in your house is too low (measure and adjust accordingly). Any blockages have to be removed.Click to see full answer. Likewise, why is my water softener always draining? Constant Draining A prolonged power outage could cause the system to drain at an inappropriate time, if you neglected to check the timer after power restoration. If the water softener continues to run and drain, the system may be stuck in the regeneration phase and not automatically switching to the conditioned phase.One may also ask, how do you reset a water softener? How to Restart a Water Softener Turn off your water softener. Remove the salt keeper from you water softener and add more water softener salt to the keeper. Make sure the keeper is almost empty before you add more salt to it. Pour 3 gallons of water into the salt keeper to help dissolve the salt after you added it. Turn your water softener back on. Subsequently, question is, why is my water softener not working? Clean the resin tank injector: The injector sometimes gets plugged with sediment caused by dirty salt. To clean it, first engage the softener’s bypass valve to shut off the water. Next, relieve the water pressure by running the softener through a manual regeneration.Can you run water while water softener is regenerating?With a single tank system you will get hard water during the regeneration process. If you use the hot water you will be refilling the hot water heater with hard water. So–yes you can use water during regeneration but it may have some undesirable results.
